total comfort electrical

Generator Sales & Installation

DeLand, FL

  • Portable Generator Installation

    Total Comfort can install a circuit through which you can connect your portable generator to your electrical panel. When we install a circuit to your portable generator we provide a plug somewhere outside your home in a safe and well ventilated location and a cord that will connect to your portable generator. When we do this circuit, we always install an "interlock" switch on your electrical panel. This device is designed to allow safe back-feeding of your panel through the portable generator during power outages and eliminating illegal and unsafe back-feeding situations that could potentially electrocute power line personnel or damage your generator. Each installation can be very different so we have to come out to your home or business and give you an estimate based on your individual conditions and requirements.

Backup Generators for your home

Your home is the most important place to you. To maximize the comfort of your home, protect it today with a Honeywell backup generator. At Total Comfort, we offer many options to provide security and comfort from a power outage.


generator installation and service in DeLand,fl

Cover what is important

At Total Comfort, we are dedicated to providing complete comfort and protection to our customers. With Honeywell standby generators, your can be at ease. We offer a vast range of sizes to backup every circuit in your home.

Mobile Link™

Using your mobile devices, such as a smartphone or tablet, you can now monitor your generator's status from anywhere. With Mobile Link™, you are constantly connected with your generator and are able to recieve 40 different notifications. You are also capable of sending them to your maintenance provider.

Dependable, Quiet, and Solid

Our units are equipped with the Generac OHVI® engine. This engine is designed specifically for generator use, as it is very quiet and reliable. Low speed automotive engines are installed in our larger units that run at 1800 RPM, which results in very low noise. Honeywell generators are equipped with noise reduction panels, and WhisperCheck™ mode, which is even quieter than normal operation.

Runs Until Your Power is Restored

Honeywell generators run off of your home's current natural gas or LP fuel supply. Both easily meet EPA clean air standards, don't face the spilling or storage issues of diesel, and are in continuous supply.

Durable, Ready for Any Conditions

The premium aluminum enclosure is modeled to withstand winds up to 150 mph and has a 3rd party certification to NFPA standards allowing for installations as close as 18” from the home. The RhinoCoat™ finish adds superior weather protection and resists corrosion, even in salt air.

Spec Sheets
11 15 20 kW

Generators in Deland

Your home's power is constantly monitored by the generator and transfer switch. If there is a power outage, you do not need to start the generator. It is automatic. Like an air conditioner, the generator sits outside your home and the transfer switch sits next to your home's breaker box.

  • Within seconds of sensing utility power is lost, the generator starts automatically to supply power.
  • When the return of utility power is sensed, it automatically shuts down...
  • ...and returns to standby mode, ready for the next outage.

Features of Honeywell Generators

The Honeywell Sync® 2.0 transfer switch easily manage two large loads right out of the box.The Honeywell Sync transfer switch uses advanced power management technology to create an efficient system that accommodates a range of coverage requirements. Manage two air conditioners right out of the box without adding additional components or cost.

  • 100 - 400 Amp, service rated, 1Ø, NEMA 3R aluminum enclosure
  • 100 - 400 Amp, non-service rated, 1Ø, NEMA 3R enclosure
  • NEMA 3R enclosure for outdoor applications, reducing weight and providing additional corrosion protection

Need more power management capability?

Add additional large loads to the Sync transfer switch system by adding up to four PMM modules, which can be easily placed anywhere along the line, indoors or out. This flexibility is ideal for larger homes with multiple air conditioners.

Pre-wired 12 circuit switch

The pre-wired switch is an automatic transfer switch and distributed load center that backs up selected circuits for essential circuit coverage. Pre-wired for the easiest and least expensive installation on the market, it is an excellent value when whole house coverage is unnecessary. For installation with the 11kW only.

CSA transfer switches

CSA approved transfer switches provide up to whole-house coverage for Canadian installations

  • 100 & 200 Amp service rated, single phase
  • NEMA 3R enclosure for outdoor applications, reducing weight and providing additional corrosion protection
  • Employs CUL rated circuit breakers on the utility side of the transfer contactor for full downstream protection

Total Comfort Heat & Air Conditioning, Inc. Reviews
Top Rated Electricians in Deland

Stay connected with Total Comfort!